
We Come To You!
Our mobile tyre fitting service is your convenient solution
Need a tyre in Williton?
Tell us your tyre size and where you are — we quote before we set off.

Areas We Cover
Drivers across England and Wales — maximum 60 minute response
Popular Tyre Brands Available
We supply & fit new, high-quality and branded tyres for all major vehicles









See what our customers think
Browse through our customers testimonials.
Mobile Tyre Fitting in Williton
Williton, the A39 and A358 junction — 24 hours a day.
Maximum 60 minute response. We have drivers across England and Wales, so a call gets a fitter to the vehicle rather than you moving a car that is not safe to move. Call 07989 606060 with your tyre size and location.
Williton is the crossroads of this whole district. The A39 runs through it along the north Somerset coast, the A358 starts here and heads south to Taunton, and the B3191 goes north into Watchet. Three roads meet in one village and there is no fourth.
It is also almost exactly the same distance from Minehead, Bridgwater and Taunton, which is why so much of the district's business ended up here rather than in a larger town. For a mobile fitter that geography is the whole story: everything in west Somerset passes through Williton, and nothing here is close to a depot.
Roads and places we get called to around Williton
- The A39 east towards Bridgwater and west towards Minehead.
- The A358 south towards Bishops Lydeard and Taunton.
- The B3191 north into Watchet.
- The station, the signal box and the gated crossing beside it.
- The car parks and yards behind the main road.
- The lanes running out towards Doniford and the coast.
Three roads and no alternative
Somerset Council publishes designated emergency diversion routes for the A39 and the A358, and the existence of that document tells you what you need to know about this corner of the county. There is no parallel road. When one of the two shuts, the traffic does not move onto another A-road, it moves into lanes.
Williton is the hinge. A closure between here and Bridgwater, or here and Taunton, sends an A-road's worth of vehicles into single-track lanes full of drivers who do not know where they are and are following a diversion sign rather than a route. Punctures follow, because that is what happens when unfamiliar traffic meets a verge. If you are caught in one of those, tell us the diversion you were following and the last village sign you passed, not the postcode of the place you were trying to reach.
The crossing by the signal box
The West Somerset Railway crosses the road at the station, on the original alignment of the turnpike, between the signal box and the road bridge that superseded it. The box went in in 1874 and is the only Bristol and Exeter Railway box still in use anywhere. The gates are worked by hand.
Two things about it are worth knowing. It is a heritage line running a seasonal timetable — set days between spring and autumn rather than every day — so the gates are across the road far less often than a main-line crossing would be, and the through route uses the bridge rather than the crossing in any case. But the road reaches it round a bend with a thirty limit on it, and the railway's own account is that the gates get hit roughly once a year. If you have clipped a gatepost or the kerb on that bend, expect the wheel to have taken it as well as the tyre, and say so when you ring.
Equidistant from everything
Being the same distance from three towns sounds convenient and is the opposite. It means there is no natural place nearby to limp to. From Williton, every option is fifteen miles away, and driving fifteen miles on a tyre that is losing air is how a repairable puncture becomes a new tyre.
So the practical advice here is simply to stop where you are and let the van come. We are on these three roads constantly, and the time we quote already accounts for the fact that they are the only ones there are.
We are in Watchet daily, cover Bishops Lydeard at the far end of the A358, and reach Minehead along the A39.
What we can do in Williton
- Mobile tyre fitting — supply and fit a replacement at your home, workplace or the roadside, including balancing and disposal of the old casing.
- Mobile puncture repair — where the damage is inside the repairable area of the tread, a repair is cheaper and quicker than replacement.
- Commercial tyre fitting — vans, minibuses and other light commercial vehicles.
Stuck in Williton right now? Call 07989 606060 and we will tell you what we can do and what it will cost before we set off.
Before we arrive
- Find your locking wheel nut key. Without it the wheel cannot come off. It is usually in the glovebox, the boot well, or with the spare.
- Read your tyre size off the sidewall, for example 205/55 R16 91V, so we arrive with the right tyre rather than making a second trip.
- If you are on a motorway or dual carriageway, get as far left as you can or into a refuge, then everyone out through the passenger doors, over the barrier and well back from the carriageway — not in the car. Ring with the junction number and your direction of travel.
- Describe where you are, not just your postcode. A junction number, a bay number, a farm, a pub or a bridge puts us on the spot far faster — rural postcodes can cover a mile of near-identical lane. We bring our own lighting, so darkness is not a problem.
More detail in our guides on what to do with a flat tyre on the motorway and checking your tread depth.
Repair or replace
Whether a tyre can be repaired is decided by where the damage is, not by how big the hole looks. Damage inside the central three-quarters of the tread, up to 6mm across, is repairable under BS AU 159. Damage in the shoulder or the sidewall is not, at any size — there is no way to reinforce a sidewall that flexes on every revolution.
The other thing that rules out a repair is having driven on the tyre flat. A short distance is enough: the sidewall folds under the rim and the internal cords break. That often does not deflate the tyre at the time — it shows up days later as a soft rounded bulge, and a tyre in that condition has to be replaced whatever the original puncture looked like.
How the damage was made matters as much as where it is. A nail or a screw pierces, leaving a neat hole that is usually well within the limit. Flint, crushed stone, quarry aggregate and dropped stainless fixings cut instead — a gouge or a tear rather than a puncture — and a cut frequently exceeds the repairable size even when it lands squarely in the middle of the tread. That is why we take the tyre off and look inside before telling you either way, rather than judging it from the outside.
Impact damage behaves the same way. A pothole or a kerb taken at speed compresses the suspension fully and pinches the sidewall between the rim and the obstacle. If that has happened, check both tyres on that side — the rear takes the same hit a fraction of a second after the front — and look for a bulge rather than for a hole.
We carry both outcomes to every job, so a repair that turns out not to be safe does not become a second visit.
Age and wear
Tread depth is not the only thing that retires a tyre. Rubber hardens as it ages whatever the mileage, which is why a caravan, motorhome, trailer or second car can carry almost full tread on a casing that is well past useful life. The four-digit date code on the sidewall gives the week and year it was made — our guide on how long tyres last covers where the line falls.
Depth matters most in standing water. The legal minimum is 1.6mm across the central three-quarters, but a tyre's ability to clear water falls off well above that — by about 3mm you are losing it noticeably, and aquaplaning starts at lower speeds than most drivers expect. Our tread depth guide covers checking it with a 20p coin in about a minute.
Wear patterns are worth reading too. Both outer shoulders going before the middle usually means underinflation, or a lot of cornering and hill descent; one edge alone is more often alignment. We will tell you which it looks like when we are there — see uneven tyre wear for the full picture.
Vans and light commercials
A van needs a tyre carrying the C marking and the correct load index. That is not interchangeable with a passenger tyre of the same nominal size, whatever may have been fitted before — the casing is built to carry more, and a loaded van on passenger-rated tyres is running outside the rating.
Tell us whether the van is loaded when you ring, and we will bring the right fitment first time. Details of what we carry are on the commercial tyres page.
How the repair is done
The wheel comes off, the tyre comes off the rim, and the inside of the casing is inspected before anything else happens. The puncture is then repaired from within using a combined plug and patch, and the wheel is balanced before it goes back on.
That inspection is the part that matters. An external plug pushed into the tread without removing the tyre is a get-you-home measure: it can seal the hole while leaving damage inside the casing entirely undetected, and that damage is what causes tyres to fail later at speed. It is the same job a garage does, done where the vehicle already is.
A slow leak with no puncture to find
A tyre that loses air over days with nothing in the tread has usually failed at the seal rather than the surface — a corroded alloy bead seat, or a perished valve stem. Neither can be found with the tyre still on the rim, and neither is fixed by topping the pressure up.
It typically announces itself on the first cold morning of the year. Cold air contracts, dropping the pressure a few PSI, and a leak that was tolerable through mild weather is a visibly flat tyre by the time you come out to the car. The fix is the tyre off the rim, the sealing face cleaned back to sound metal, and a new valve.
Common questions in Williton
- The gates are shut across the road at the station.
- They are hand-worked and the line only runs on set days, so it will not be long. If your car is stopped near the crossing, move it clear of the approach bend first if it will move at all, then ring us.
- I am on a diversion off the A39 and I am lost in lanes.
- Give us the diversion route you were following and the last village name on a sign. That places you far better than the destination you were aiming for.
- Should I drive to Taunton or Minehead instead of waiting?
- No. It is fifteen miles in any direction from here and a soft tyre will not survive it. Stay where you are.
- Do you cover Doniford, Sampford Brett and Stogumber?
- Yes, across TA4 and along all three of the roads that meet in the village.
Not in Williton?
We cover the rest of Somerset and beyond. If you are closer to one of these, the same service and the same number applies:
- Mobile tyre fitting in Axbridge
- Mobile tyre fitting in Bath
- Mobile tyre fitting in Bishops Lydeard
- Mobile tyre fitting in Bridgwater
- Mobile tyre fitting in Bruton
- Mobile tyre fitting in Burnham-on-Sea
- Mobile tyre fitting in Castle Cary
- Mobile tyre fitting in Chard
- Mobile tyre fitting in Cheddar
- Mobile tyre fitting in Clevedon
- Mobile tyre fitting in Crewkerne
- Mobile tyre fitting in Dulverton
Why use a mobile fitter?
You do not have to move a vehicle that is not safe to move. No limping to a garage on a space-saver, no waiting room, and no second trip to collect the car.
We bring the same equipment a garage would use, wheel balancing included, to wherever the vehicle already is.
Tyre brands we supply
We stock across three tiers so you can balance cost against tread life and wet-weather performance. If you tell us your budget, we will say honestly which tier makes sense for the mileage you do.
Budget and mid-range
- Farroad
- Hifly
- Churchill
- RoadX
- Infinity
Premium
- Michelin
- Pirelli
- Bridgestone
- Goodyear
- Continental
Need a brand that is not listed? Call us and we will check availability for your size, or see how mobile tyre fitting works.







