
We Come To You!
Our mobile tyre fitting service is your convenient solution
Need a tyre in Guide Post?
Tell us your tyre size and where you are — we quote before we set off.

Areas We Cover
Drivers across England and Wales — maximum 60 minute response
Popular Tyre Brands Available
We supply & fit new, high-quality and branded tyres for all major vehicles









See what our customers think
Browse through our customers testimonials.
Mobile Tyre Fitting in Guide Post
Guide Post, Morpeth Road and the A196 — 24 hours a day.
Maximum 60 minute response. We have drivers across England and Wales, so a call gets a fitter to the vehicle rather than you moving a car that is not safe to move. Call 07989 606060 with your tyre size and location.
Guide Post is named after a road sign. A guide post was the finger post that stood at a country junction telling you which arm went where, and whatever stood here originally, the junction is still what the village is built around.
Two A-roads leave it for the same town by different routes. The A196 runs through as Morpeth Road, coming down from Morpeth and going on over the Wansbeck at Stakeford Bridge to Ashington. The A1068 leaves for Ashington as well, but crosses the river a little way upstream at Sheepwash Bridge. Which of the two you are on decides which bridge you go over and which side of Ashington you arrive at.
Roads we get called to around Guide Post
- Morpeth Road, the A196, through the middle of the village.
- The A1068 turn towards Sheepwash Bridge and Ashington.
- Stakeford Lane, running the length of the village into Stakeford.
- The roads south towards Scotland Gate and Bedlington.
- The A196 north towards Pegswood and Morpeth.
An old main road with a village on it
The A196 was built to be a through route and it still looks like one: a wide straight carriageway with frontage on both sides, side turnings at intervals, bus stops and parking along it. What it carries now is mostly local traffic, because the spine road took the long-distance movement away years ago.
The result is a road with the geometry of a main road and the behaviour of a village street. Parked cars sit on it rather than in bays, people cross it between parked cars, and traffic comes through it at a speed the road invites rather than the speed the frontage wants. It is a good place to catch a kerb.
For us it is mostly workable — there is usually enough width to put a van beside a car without stopping anything. What is worth saying is which side of the road you are on and whether you are north or south of the junction, because those two facts get us to the right hundred yards of a long straight street.
Stakeford Lane
Stakeford Lane is about a mile long and runs from Guide Post straight through into Stakeford, carrying the best part of a dozen postcodes along its length. A street name on its own is not enough to place a car on it.
The nearest cross street, or the postcode, or something you can see from where you are standing — any of those cuts it down from a mile to a few doors. Without one, a van drives the length of it looking.
The rows and the working room
Away from Morpeth Road the village runs to terraced rows and post-war semis, and they are two entirely different jobs. On a row the van has to stand in the carriageway beside you; on the later streets it can usually get onto the drive with the car.
The one thing that decides it either way is what sits directly across from the wheel that needs doing. A glance at the opposite kerb before you ring tells us whether we stop level with you or a few doors up.
We also cover Stakeford along Stakeford Lane, Choppington to the west and Ashington over the river.
What we can do in Guide Post
- Mobile tyre fitting — supply and fit a replacement at your home, workplace or the roadside, including balancing and disposal of the old casing.
- Mobile puncture repair — where the damage is inside the repairable area of the tread, a repair is cheaper and quicker than replacement.
- Commercial tyre fitting — vans, minibuses and other light commercial vehicles.
Stuck in Guide Post right now? Call 07989 606060 and we will tell you what we can do and what it will cost before we set off.
Before we arrive
- Find your locking wheel nut key. Without it the wheel cannot come off. It is usually in the glovebox, the boot well, or with the spare.
- Read your tyre size off the sidewall, for example 205/55 R16 91V, so we arrive with the right tyre rather than making a second trip.
- If you are on a motorway or dual carriageway, get as far left as you can or into a refuge, then everyone out through the passenger doors, over the barrier and well back from the carriageway — not in the car. Ring with the junction number and your direction of travel.
- Describe where you are, not just your postcode. A junction number, a bay number, a farm, a pub or a bridge puts us on the spot far faster — rural postcodes can cover a mile of near-identical lane. We bring our own lighting, so darkness is not a problem.
More detail in our guides on what to do with a flat tyre on the motorway and checking your tread depth.
Repair or replace
Whether a tyre can be repaired is decided by where the damage is, not by how big the hole looks. Damage inside the central three-quarters of the tread, up to 6mm across, is repairable under BS AU 159. Damage in the shoulder or the sidewall is not, at any size — there is no way to reinforce a sidewall that flexes on every revolution.
The other thing that rules out a repair is having driven on the tyre flat. A short distance is enough: the sidewall folds under the rim and the internal cords break. That often does not deflate the tyre at the time — it shows up days later as a soft rounded bulge, and a tyre in that condition has to be replaced whatever the original puncture looked like.
How the damage was made matters as much as where it is. A nail or a screw pierces, leaving a neat hole that is usually well within the limit. Flint, crushed stone, quarry aggregate and dropped stainless fixings cut instead — a gouge or a tear rather than a puncture — and a cut frequently exceeds the repairable size even when it lands squarely in the middle of the tread. That is why we take the tyre off and look inside before telling you either way, rather than judging it from the outside.
Impact damage behaves the same way. A pothole or a kerb taken at speed compresses the suspension fully and pinches the sidewall between the rim and the obstacle. If that has happened, check both tyres on that side — the rear takes the same hit a fraction of a second after the front — and look for a bulge rather than for a hole.
We carry both outcomes to every job, so a repair that turns out not to be safe does not become a second visit.
Age and wear
Tread depth is not the only thing that retires a tyre. Rubber hardens as it ages whatever the mileage, which is why a caravan, motorhome, trailer or second car can carry almost full tread on a casing that is well past useful life. The four-digit date code on the sidewall gives the week and year it was made — our guide on how long tyres last covers where the line falls.
Depth matters most in standing water. The legal minimum is 1.6mm across the central three-quarters, but a tyre's ability to clear water falls off well above that — by about 3mm you are losing it noticeably, and aquaplaning starts at lower speeds than most drivers expect. Our tread depth guide covers checking it with a 20p coin in about a minute.
Wear patterns are worth reading too. Both outer shoulders going before the middle usually means underinflation, or a lot of cornering and hill descent; one edge alone is more often alignment. We will tell you which it looks like when we are there — see uneven tyre wear for the full picture.
Vans and light commercials
A van needs a tyre carrying the C marking and the correct load index. That is not interchangeable with a passenger tyre of the same nominal size, whatever may have been fitted before — the casing is built to carry more, and a loaded van on passenger-rated tyres is running outside the rating.
Tell us whether the van is loaded when you ring, and we will bring the right fitment first time. Details of what we carry are on the commercial tyres page.
How the repair is done
The wheel comes off, the tyre comes off the rim, and the inside of the casing is inspected before anything else happens. The puncture is then repaired from within using a combined plug and patch, and the wheel is balanced before it goes back on.
That inspection is the part that matters. An external plug pushed into the tread without removing the tyre is a get-you-home measure: it can seal the hole while leaving damage inside the casing entirely undetected, and that damage is what causes tyres to fail later at speed. It is the same job a garage does, done where the vehicle already is.
A slow leak with no puncture to find
A tyre that loses air over days with nothing in the tread has usually failed at the seal rather than the surface — a corroded alloy bead seat, or a perished valve stem. Neither can be found with the tyre still on the rim, and neither is fixed by topping the pressure up.
It typically announces itself on the first cold morning of the year. Cold air contracts, dropping the pressure a few PSI, and a leak that was tolerable through mild weather is a visibly flat tyre by the time you come out to the car. The fix is the tyre off the rim, the sealing face cleaned back to sound metal, and a new valve.
Common questions in Guide Post
- I am on Morpeth Road but you will not know where.
- Give us the side of the road and whether you are north or south of the junction. It is a long straight street and those two facts narrow it to a hundred yards.
- I said Stakeford Lane and you drove past me.
- It runs about a mile and covers a lot of postcodes. Add the nearest cross street or the postcode itself and that stops happening.
- Is the A196 a fast road through the village?
- It is built like one, which is the problem. Wide and straight with frontage on both sides, so it invites more speed than the parking along it can take.
- Can you work with cars parked both sides of the row?
- Normally yes, as long as nothing is directly opposite the wheel we need. That is the one thing worth checking before you ring off.
- Do you cover Scotland Gate, Stakeford and Pegswood?
- Yes, across NE61 and NE62.
Not in Guide Post?
We cover the rest of Northumberland and beyond. If you are closer to one of these, the same service and the same number applies:
- Mobile tyre fitting in Alnwick
- Mobile tyre fitting in Amble
- Mobile tyre fitting in Ashington
- Mobile tyre fitting in Bedlington
- Mobile tyre fitting in Belford
- Mobile tyre fitting in Berwick-upon-Tweed
- Mobile tyre fitting in Blyth
- Mobile tyre fitting in Choppington
- Mobile tyre fitting in Corbridge
- Mobile tyre fitting in Cramlington
- Mobile tyre fitting in Haltwhistle
- Mobile tyre fitting in Hexham
Why use a mobile fitter?
You do not have to move a vehicle that is not safe to move. No limping to a garage on a space-saver, no waiting room, and no second trip to collect the car.
We bring the same equipment a garage would use, wheel balancing included, to wherever the vehicle already is.
Tyre brands we supply
We stock across three tiers so you can balance cost against tread life and wet-weather performance. If you tell us your budget, we will say honestly which tier makes sense for the mileage you do.
Budget and mid-range
- Farroad
- Hifly
- Churchill
- RoadX
- Infinity
Premium
- Michelin
- Pirelli
- Bridgestone
- Goodyear
- Continental
Need a brand that is not listed? Call us and we will check availability for your size, or see how mobile tyre fitting works.







